Getting Started with the barKoder Demo App - Settings Page

Start ScannerAutomatically #

If enabled every time we start the app the scanner will start automatically.

barKoder settings #

Decoding Speed #

This setting determines the pace at which the system processes and decodes barcode information, affecting the speed of barcode scanning.

Decoder Resolution #

Decoder resolution refers to the level of detail and clarity in barcode images, and this setting allows users to adjust it to optimize scanning performance.

Location in Preview #

This setting specifies the placement or display of barcode information within the scanning preview or user interface.

Allow Pinch to Zoom #

Enabling this option allows users to use a pinch-to-zoom gesture for magnifying or reducing the size of the barcode preview, which can aid in accurate scanning.

Enable Region of Interest #

Region of Interest (ROI) settings enables users to define specific areas within the barcode preview for targeted scanning.

Beep on Success #

When turned on, the scanner produces an audible beep as feedback to signal a successful barcode scan.

Vibrate on Success #

Activating this option causes the device to vibrate as feedback following a successful barcode scan.

Enable Misshaped Code Capture #

This feature allows the scanner to make an attempt to decode barcodes that are misshapen or distorted.

Scan Blurred #

When enabled, the scanner will work to decode barcodes that might appear blurry or unclear.

Continuous Scanning #

When activated, continuous scanning enables the barcode scanner to continually scan for barcodes without the need to trigger each scan manually.

Continuous Scanning #

This option is exclusively accessible when continuous scanning is enabled, and it regulates the interval between two identical barcodes before they are recognized as distinct barcodes.

Choosing "1" signifies that, after detecting a code, the scanner will wait for 1 second before identifying the same code as a new one.It doesn't stop the scanner from detecting a different barcode!
Opting for "unlimited" means that once a barcode is detected, it will not be re-recognized throughout the current scanning session.

Result settings #

Formatting type #

Charset #

General settings #

Default search engine #

The search engine utilized for querying decoded data.This functionality can be found in the bottom sheet that appears following each successful decoding process.

Webhook settings #

This section of the settings area is explained in-depth in webhooks.

This document will only mention them for brevity.